Lubricant formulated from state-of-the-art mineral oils and additives for metal machining.
AMPAC 303 SEVERE CUT
Los aceites minerales refinados y los aditivos de última generación aseguraran un buen desprendimiento de la viruta mecanizada, protegen la herramienta y otorgan una superficie mejor terminada.
- Less loss of the same through the chip and the machined part saving lubricant .
- Low evaporation to minimize its presence in the environment .
- Maximum lubrication and cooling of the part and tool .
TEST
METHOD REF. ASTM
UNIT
VALUES
Density @ 15 ºC
D-287
Grs / cm3
0.887
Viscosity @ 40 ºC
D-445
cSt
32.6
Behavior against copper
-
-
Staining
4 EP balls at 620 kgf
D-2783
-
Pass (do not weld)
Imprint diameter
mm
1.4
Sulfur content
D-4951
% P / P
3.3
Chlorine content
-
% P / P
0
Phosphorus content
D-4951
ppm
256
Fat content
-
% P / P
3 (combined)
200 and 100 liter drums, 20 liter bucket.
All containers must be stored under cover. In case of being stored outside the drums must be in
vertical position to avoid the possible entry of water as well as the deterioration of the container. Products must not be
stored at temperatures above 60º C, exposed to strong sun or low temperatures.